Top class motorfeedback
... for high dynamic synchronous motors and drives
- Highest precision for high dynamic motion control
- Compact design: Ø 58 mm
- BISS-C, SSI with 19 bit single- turn and up to 2,048 sin/cos
- Incremental up to 25,000 PPR
- Electronic ID label
Highest precision for high dynamic motion control.
The WDGF was designed for the highest requirements. Even under extreme environmental conditions the WDGF operates reliably and provides highly accurate signals for the fast control of synchronous motors. The optical principle guarantees a fast and accurate measurement of position and speed. The rugged design ensures a high operational stability.
| Encoder motor feedback WDGF | |
|---|---|
| Type: | WDGF 58M/R |
| Interface for singleturn: | SSI, BiSS-C |
| Clock frequency SSI/BiSS-C: | 4/10 MHz |
| Funcitons: | interversion of the direction, preset, status LED |
| Resolution singleturn absolute: | max 19 bit |
| Resolution sin/cos: | 2048 ppr, optional 512, 1024 ppr |
| Output circuit: | sin/cos, 1 Vpp, 120 Ohm |
| Output channels | AB |
| Limit frequency (-3 dB): | 400 kHz |
| Resolution only incremental: | up to 25,000 ppr |
| Housing: | Ø 58 mm, L 40 mm |
| Shaft: | cone 1/10, Ø 9.25 mm, L 16.5 mm |
| Operating speed: | max. 12,000 rpm |
| Permissible shaft load: | max. 80 N radial, max. 60 N axial |
| Power supply: | 4.75 VDC up to 5.5. VDC 3.5 VDC up to 30 VDC |
| Operating temperature: | -40 °C up to +115 °C |
| Protection rating: | IP67 all around, shaft sealed to IP65 |
| Connection: | Cable output, 2 m, tangential |
Products Motor feedback WDGF
print page
up
Contact
Demande